|
| Shanghai Pacific Pump Co.,Ltd. |
 |
Tel：+86 150 0077 1656 |
|
Fax：+86 21 5686 6240 |
|
Web：www.pmpump.com |
|
E-mail：sales@pmpump.com |
|
|
 |
Products | |
|
|
- Why choose us?
- Specialized production Manufactory for Vertical Turbine Pump
- Focus on technological innovation, Over Industry leading level
- Good experience at Domestic and oversea market
- Carefully paint for Good appearance
- Years of International service standards, Engineer one-to-one service
PRODUCT DESCRIPTION
Fire pumps are installed on fire engines, fixed fire extinguishing systems or other fire fighting facilities. They are used as special pumps for transporting liquid or fire extinguishing agents such as water or foam solutions.
This kind of vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water. LPT type vertical drainage pump is in LP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
VTP series Long Shaft Electric Vertical Turbine Water pump
√ Corrosion resistance main part material, SKF bearing, thordon bearings suitable for sea water.
√ Excellent design for high Efficiency save energy for you.
√ Flexible installation method suitable for different site.
√ Stable running, Easy to install and maintain.
RUNNING DATA
| Capacity |
20-5000 m3/h |
| Head |
3-150 m |
| Working Temperature |
0-60 ºC |
| Power |
1.5-3400KW |
Application and purpose
1 motor less fire pump
Relying on the impeller rotation, the energy is transferred to the liquid without power source fire pump.
2 vehicle fire pump
An unpowered fire pump mounted on the chassis of a fire engine.
3 marine fire pump
Non-power fire pump installed in ship, offshore platform and working environment on water.
4 engineering-oriented fire pump
Fire pumps for fire hydrant systems, water sprinkler systems, foam extinguishing systems, etc.
5 normal pressure fire pump
Fire pump with rated pressure less than 1.6 MPa.
6-middle pressure fire pump
Fire pump with rated pressure ranging from 1.8 MPa to 3.0 MPa.
PUMP ADVANTAGE
1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump.
More detail about our VTP series Long Shaft Vertical Turbine Pump for curve and dimension and data sheet please conatct Tongke.
Note before order
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L; for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.
PRODUCT SHOW
|
Diesel Fire Pump Vertical Turbine Type(pdf) |
|
|
|
|
|
